Category: Iron Shots Tips

A Beginner’s Guide To Hitting Irons In Golf

Most golfers love to hit a massive drive off the tee and creates a great shot towards the hole by sending over the treetops. Long drives won’t make a point if you don’t understand how to sink a putt, but long drives are so great to apply with your new colleagues. Long shots with a wood isn’t as important as executing a short shot with an iron. This kind of shot might seem simple but, to the inexperienced golf player, it can be one of the most difficult shots to play. This article will provide some good info regarding how to hit irons effectively when playing golf.


Step #1: The Right Position of the Body and Proper Posture

The correct set up of the body like proper posture as well as alignment is the first step to an effective hit. The most common error made by most beginner golf players is bending of the body. An inexperienced golf player will bend from the back over the club instead of at the waist. This will certainly affect the trajectory adversely and will result in a great muscle pain in the back. Keep a straight back but not rigid in playing golf. Tilt through the waist allowing for swing through the hips. It is important that you sustain an even position over your feet to ensure that you remain balanced throughout the swing.

Step #2: Ball Placement

An overlooked aspect of setting up iron shots is that of ball position. Long drives is among the most considered position by most golfers but short shot is also essential. When we talk about the ball position, we refer to the position in accordance with your body. The ideal ball/body alignment is with the ball being no farther back than the sternum and no farther forward beyond the left armpit. Novices go awry by playing the shot too far forward which causes to poor slices as well as putts. When the ball heads into the ground when engaged, try straightening your sternum and hitting it again.

Step #3: The Takeaway Position

When the club is pulled back and hit through, it is known as takeaway position. Takeaway contributes considerably to the swing and its success, that is why it’s an important position. When hitting an iron, the tactic being followed is the 2-8-2 rule. The first Two in the rule is the first 2 inches in a takeaway in which the club travels straight back. This needs the body (arm, legs and shoulders) to maneuver as one . At 8 inches, the club curves upwards but with out moving the wrists. Last but not least, at the twelfth inch, the wrist turns placing the shaft horizontal to the ground. The hands must level to the shoulder height and the shoulder must be tight. Follow through along the target line and then hit the ball with a square iron face, accomplish this after forming the takeaway.

Step #4: Consider The Course

It’s also essential to consider the layout of the swing. Adjustments to be made during a takeaway or swing depends on the surface being played. Complete a downswing exactly where the ball will fall towards the hole when the ground makes a downhill slope. For example, a slight downhill and green ground would be perfect for a slight curve to possess a gravitational pull. It might also be worthwhile to remove any obstructions within the path which could encumber the shot.


How To Hit A Fade With Iron Clubs In Golf For Beginners

Golf may seem like a simple sport to play upon first observation, but, as with most sports, there are many technicalities which make it very difficult for the untrained individual. Apart from the several golfing terms, also you need to acquaint yourself with some golfing techniques to wind up playing a great game. The fade is among the most popular forms of shots strike when iron club is used. The golfer Jack Nicklaus has left a comment on fades being the “bread and butter” of golfing styles and a strongly recommended method to use. This article will give details on the fade and how it can be hit with iron clubs.

Become familiar with the Fade Shot

A fade shot will move in the opposite direction from left to right. It is a short shot, which is great in hitting on greens and frequently generates greater distance when utilizing iron clubs because of the backspin. There are two different kinds of fades that can be hit: the real fade and the over the top fade.

1. The Real Fade

Choosing the proper iron club to use when striking a fade to fulfill the needed shot is essential. A real fade is a shot curving from the left to the right with roughly 5 yards with irons meaning that an 8 iron will be ideal. Apart from selecting the right club, positioning of the club on swing creates the outcome of the shot.


fade golf ball

It’s recommended for real fade to have a coordination with the ball when it faces square to the target. The swing direction should be opened with the alignment of the body and stance is directed to the left of the ball. It is essential to the fade to have an open path because it helps the iron to lift and spin the ball along a curvature to the targeted line.

2. The Over The Top Fade

The over the top fade can be described as a slight fade where the ball has a small curvature from left to right. If you want to lessen the impact of the shot, you must use a 7-iron in the over the top fade. It is not true as what some newbies believed that this kind of fade is the result of a mistake in one’s swing or shot. A purposeful faulty fade will make an over the top fade.

It is very important to make a square stance with closed body alignment if you engage in over the top fade. This closed position will cause the swing would be “over the top” of the swing course unlike the real fade which uses an open posture. The clubface must be square to the target and also the ball should be hit beneath to create a backspin for slight curvature to the target line.

What Mistakes Do Novices Make When Striking Fades With Iron Clubs?

All beginners’ make mistakes when learning different shots from drives to real fades. The following are the normal mistakes in terms of fade learning:

– Sending the club too far over the top is performed when hitting with tightened arms and short holds.

-Release the club too much to get rid of the capability to get an open stance when a swing is completed.

– A slice takes place when you hold the club face too wide with tightened wrists.

– You will develop a pull instead of a fade if you hold the club firmly.

– You will not understand that the fade is a purposeful swing to the left with curve to the right.